China White plastic fitting Manufacturers, Suppliers, Factory

A solenoid valve is an efficient method of converting electrical signals into pneumatic functions. Applying electricity to the solenoid quickly directs air through the valve and into the circuit.You can rest assured to buy JM/JMJ G1/4'' Pneumatic solenoid valve from our factory, and we will offer you the best after-sale service and timely delivery.

Festo series air source treatment components are mostly made of zinc alloy or aluminum alloy. The surface is sandblasted and painted, with fine workmanship and beautiful appearance.
High mechanical strength, high pressure resistance, and with stable performance, sensitive pressure adjustment and stable output.
Pressure regulator, filter and lubricator can be freely combined according to actual needs. Compared with SMC series air source treatment components, Festo series air source treatment units can withstand the highest working pressure of 1.2~1.6MPa, and the installation is more convenient. The following is the introduction of Air Treatment Unit Withstand A Maximum Pressure AF Pneumatic Filter, hoping to help you better understand it. Welcome new and old customers to continue to cooperate with us to create a better future!

MV522R mechanical valve is a pneumatic control element, mainly used for directional control. Its model is MV522R, where "MV" means mechanical valve, "52" means two-position five-way, "2" means the pipe diameter is G1/4, and "R" means the head of the mechanical valve is a roller head. Technical parameters Medium: Air (needs to be filtered through a 40um filter) Action mode: Direct acting Pipe diameter: G1/4 Working pressure: 0.1~0.8MPa (0.1~114psi) Working temperature: -5~60°C (28~140°F) Lubrication: No lubrication required Application scenarios MV522R mechanical valve is suitable for various industrial applications that require directional control, with excellent quality, reliable performance, and good versatility. Its working principle is to achieve switch action through pneumatic control, which is suitable for automation equipment that requires precise control.

The rotary cylinder is a pneumatic actuator that uses compressed air to drive the output shaft to perform reciprocating rotational motion within a certain angle range.

The standard cylinder is mainly composed of three parts: the cylinder body, the piston and the cylinder head. Lubricant is usually sprayed inside the cylinder body to reduce friction and make the piston move more smoothly. The piston slides in the cylinder body through the guide ring and seal to prevent gas leakage. The cylinder head plays the role of closing the cylinder body and connecting the gas source to allow gas to enter the cylinder.

‌3V110-06 series solenoid valve‌ is a two-position three-way solenoid valve with multiple voltage options and good sealing performance. The following is a detailed introduction to this series of solenoid valves: Basic parameters and characteristics ‌Model‌: 3V110-06 ‌Working medium‌: Air (needs to be filtered through a filter screen above 40µm) ‌Action mode‌: Pilot type ‌Tube diameter‌: G1/8 ‌Effective cross-sectional area‌: 12.00mm² (CV=0.67) ‌Number of positions‌: Two-position three-way ‌Use pressure range‌: 0.15-0.8MPa ‌Maximum pressure resistance‌: 1.9MPa ‌Working temperature‌: -20-70°C ‌Material‌: Aluminum alloy ‌Electrical performance parameters‌: Standard voltages include AC380V, AC220V, AC110V, AC36V, AC24V, DC24V, and DC12V, and the use voltage ranges are AC: ±15% and DC: ±10%, respectively. The power consumption is AC: 3VA, DC: 3W. The protection level is IP65, and the heat resistance level is Class B. The maximum operating frequency is 5 times per second, and the shortest excitation time is less than 0.05 seconds.