We persist in delivering top-class Zinc Alloy Straight Microduct Connector quality, providing end-to-end bespoke solutions and unparalleled service to our clients.
Microduct Straight connectors, which guarantee a good performance. Transparent body allows verification of the micro-ducts position inside. Safety clips,tamper evident, are pre-installed. Tested & comply with EN 50411-2-8.
① Safety clips included
② Push-fit technology
③ Working Pressure: max. 25 bars
Components | ||||||
1 | Collet | POM | ||||
2 | Locking Clip | POM | ||||
3 | Cartridge | ZINK ALLOY | ||||
4 | Lock Claw | SUS301/304 | ||||
5 | Support Ring | POM | ||||
6 | Seal Ring | TEP | ||||
7 | Body | PC2807 | ||||
Fit Tube | ||||||
Pipe material | HDPE.PE.Nylon.Polyurethane | |||||
Outer diameter of pipe | Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ14,Φ16 | |||||
Technical Parameter | ||||||
Working with fluids | Air | |||||
Tightness | 0.15~0.8MPa No Leak | |||||
Pull fest | 400N | |||||
Proof pressure | 2.5MPa | |||||
Operating pressure range | 0~1.6MPa | |||||
Ambient temnperature and fluid temperature | -40~60℃ | |||||
Installation Temperature | -10℃C/+50℃ | |||||
Recommended Blowing Temperature | -15℃/+35℃ | |||||
Degree of protection | IP68 | |||||
UV-resistant grade | F1 | |||||
Insertion force | 50N max(5kg) | |||||
Lifespan: | 25 years | |||||
Standards: | EN 50411-2-8 |
ANMASPC Code | Pipe OD/ID | Pipe OD/ID | Tapered hole |
TPU3/2.1 | 3/2.1 | 3/2.1 | 2.1 |
TPU4/2.5 | 4/2.5 | 4/2.5 | 2.5 |
TPU4/2.8 | 4/2.8 | 4/2.8 | 2.8 |
TPU5/2.1 | 5/2.1 | 5/2.1 | 2.1 |
TPU5/3.5 | 5/3.5 | 5/3.5 | 3.5 |
TPU6/4 | 6/4 | 6/4 | 4 |
TPU7/3.5 | 7/3.5 | 7/3.5 | 3.5 |
TPU7/4 | 7/4 | 7/4 | 4 |
TPU7/5.5 | 7/5.5 | 7/5.5 | 5.5 |
TPU8/3.5 | 8/3.5 | 8/3.5 | 3.5 |
TPU8/6 | 8/6 | 8/6 | 6 |
TPU10/6 | 10/6 | 10/6 | 6 |
TPU10/8 | 10/8 | 10/8 | 8 |
TPU12/8 | 12/8 | 12/8 | 8 |
TPU12/10 | 12/10 | 12/10 | 10 |
TPU14/10 | 14/10 | 14/10 | 10 |
TPU14/12 | 14/12 | 14/12 | 12 |
TPU16/12 | 16/12 | 16/12 | 12 |
TPU16/13 | 16/13 | 16/13 | 13 |
TPU16/14 | 16/14 | 16/14 | 14 |
Model | A | B | C | D | E | F |
TPU03 | 31.9 | 6.9 | 10 | 11.1 | 3.2 | 2.1 |
TPU04 | 31.9 | 6.9 | 10 | 11.1 | 4.2 | 2.8/2.5 |
TPU05 | 35.4 | 8.9 | 12 | 12.8 | 5.2 | 3.5/2.1 |
TPU06 | 35.4 | 8.9 | 12 | 12.8 | 6.2 | 4.0 |
TPU07 | 41.0 | 11.5 | 14.1 | 15.4 | 7.2 | 5.5/4/3.5 |
TPU08 | 41.0 | 11.5 | 14.1 | 15.4 | 8.2 | 6/3.5 |
TPU10 | 42.0 | 14.0 | 17.5 | 18.3 | 10.2 | 08/06 |
TPU12 | 49.5 | 15.8 | 19.2 | 20.7 | 12.2 | 10/08 |
TPU14 | 50.5 | 18.0 | 22.2 | 23 | 14.3 | 12/10 |
TPU16 | 55.0 | 20.0 | 24.7 | 25.1 | 16.2 | 14/13/12 |