We strive to meet customer needs, delivery requirements and we maintain top quality standards and a highly skilled work force. We are dedicated to providing our customers with the highest quality HDPE Microduct Straight Connector End Stop manufactured to strict quality standards that meet or exceed our customers' requirements.
Standard transparent end caps, which are used to terminate open ended Tubes to avoid air leakage, water or other material ingress. End caps are preassembled with security clips.
① Safety clips included
② Push-fit technology
③ Working Pressure: max. 25 bars
|
Componants | |||
1 | Collet | POM | ||
2 | Locking Clip | POM | ||
3 | Cartridge | ZINK ALLOY | ||
4 | Lock Claw | SUS301/304 | ||
5 | Support Ring | POM | ||
6 | Seal Ring | TEP | ||
7 | Body | PC2807 | ||
Fit Tube | ||||
Pipe material | HDPE、PE.Nylon、Polyurethane | |||
Outer diameter of pipe | Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ10,Φ12,Φ16,Φ18,Φ20 | |||
Technical Parameter | ||||
Working with fluids | Air | |||
Tightness | 0.15~0.8MPa No Leak | |||
Pull test | 400N | |||
Proof pressure | 2.5MPa | |||
Operating pressure range | 0~1.6MPa | |||
Ambient temperature and fluid temperature | -40~60℃ | |||
Installation Temperature | -10℃/+50℃ | |||
Recommended Blowwing Temperature | -15℃/+35℃ | |||
Degree of protection | IP68 | |||
UV-resistant grade | F1 | |||
Insertion force | 50N max(5kg) | |||
Lifespan: | 25 years | |||
Standards: | EN 50411-2-8 |
ANMASPC Code | OD/ID |
FPF3 | 3 |
FPF4 | 4 |
FPF5 | 5 |
FPF6 | 6 |
FPF7 | 7 |
FPF8 | 8 |
FPF10 | 10 |
FPF12 | 12 |
FPF14 | 14 |
FPF16 | 16 |
FPF18 | 18 |
FPF20 | 20 |